Drain Sewer Pipe Lining

Drain and Sewer Pipe Lining from Specialized Pipe Technologies

Whenever you are dealing with slow drains, leaks and odors, have the team at Specialized Pipe Technologies repair your pipes from the inside! We provide drain and sewer pipe lining, a proven alternative method for sewer repair that’s faster, less expensive, and much less invasive than traditional pipe replacement.

Few people pay much attention to the pipes in their walls and floors, that is until there is a problem. As slow drains, blockages, leaks, foul odors, and other issues can be a source of frustration, you will need expert pipe repair specialists to get the job done. At SPT, we advise our clients to act immediately before things turn from bad to worse and leave you with an emergency issue that will only result in significant damage and higher repair costs. Get in touch with our team right away so we can have your drain system working like new again – faster, with less hassle, no property damage, and for far less than pipe replacement.

The Process of Drain and Sewer Pipe Lining

Pipe lining works on all major types of piping materials. First, we will conduct a drain or sewer inspection with the use of a high-resolution camera so we can check for blocked or corroded pipes. Once located, we use one of several cleaning processes, depending on the problem. Typically, our team will use hydro jetting or a mechanical tool to remove any dirt, grease, and obstructions, ensuring that the original pipe is as clean as possible. Next, we rely on our cured-in place pipe lining method wherein we insert a textile liner into the damaged pipe. The liner is impregnated using a liquid resin, an epoxy base, as well as a hardener. Afterward, the bladder inflates the pipe liner, pressing the epoxy against the inside of the pipe walls. Once it cures, the bladder is deflated leaving you with a clean and seamless “pipe-within-a-pipe.”


Blocked or root-intruded pipes are cleaned with tools and processes appropriate to the situation.



An epoxy-saturated liner is pulled into place through existing access points, and an internal rubber bladder is inflated, pressing the epoxy against the pipe wall.


Restored Pipe

The epoxy cures in a few short hours, then the bladder is deflated and removed, leaving behind a clean, seamless “pipe within a pipe.”

Issues That Require Drain and Sewer Pipe Lining

Once you notice that you have been dealing with reoccurring blockages, gurgling drains, sudden leaks, and foul sewer odors, your sewer system may have been compromised. While we recommend a thorough cleaning after we conduct a camera inspection, these symptoms may indicate a far worse underlying issue. These are all red flags that will require the expertise of Specialized Pipe Technologies in drain repair. 

We will be sure to conduct a sewer camera inspection, and if the issues persist, it may be a cracked pipe or misaligned joint. All these can mean that you need a more permanent sewer pipe repair solution. While you can choose to replace all your pipes by tearing out walls, ceilings, and landscaping, you will be left with the dust, debris, and headaches that go along with it. What we offer at SPT is an expert team that will line the existing pipes from the inside with safe and proven technology. We will restore the flow and seal the pipe against leaks and roots. Through this minimally invasive method of sewer crack repair, we can line drain and sewer pipes from 2” all the way up to 36”, both inside and outside your house or building.

The Benefits of Drain and Sewer Pipe Lining

Sewer and drain pipe lining is beneficial in so many ways, as this method of trenchless sewer repair is less disruptive, almost always more affordable, typically faster, and lasts just as long as conventional pipe replacement. 

Pipe lining minimizes damage to floors, walls, and landscaping areas because we insert the lining through existing cleanouts or other sewer access points. Should the sewer pipe be under concrete or pavement, there will be no need to rely on a jackhammer, as our pipe lining technology slides right into the existing pipe.

This method of drain and sewer repair is more cost-effective than pipe replacement because it typically costs far less, especially since there is little to no renovation or repair costs associated with it. We ensure minimal exterior digging, which reduces clean-up costs and keeps overall labor costs down.  Time after time we see quotes from pipe replacement companies that indicate that pipe lining cost them half what the pipe replacement would.

Without the need to dig or spend excessive time repairing walls, floors and ceilings, pipe lining saves significant time compared to pipe replacement. In addition, lining reduces the chances of leaks or blockages as well as any inconvenience for you and your community because our team solves the problem for the long-term.

At Specialized Pipe Technologies, we have been doing pipe lining for 25 years. Our pipe lining technologies have a life expectancy of about 75 years, which is about the same with conventional pipe replacement. That means you get the ease and speed that comes with pipe lining, without sacrificing longevity – all for a more reasonable price.

Specialized Pipe Technologies provides drain and sewer pipe lining in Florida, Southern California, Nevada, Northern Ohio, and the Mid Atlantic, including in the following locations:

Schedule an Appointment

Consult Specialized Pipe Technologies today to address the issues affecting your drain and sewer pipes. With pipe lining technology, you are assured of many of the benefits of traditional sewer crack repair methods, just faster and priced more reasonably. Call us today or fill out the online form to schedule your appointment for drain and sewer pipe lining

Schedule Appointment




    Specialized Pipe Technologies

    For over 25 years SPT has provided sewer, water line and storm drain inspection, cleaning and non-invasive pipe lining solutions. We help property owners and managers clean and repair their existing pipes using “no-dig” non-invasive renewal techniques. SPT repairs leaks and cracks with our internal “pipe-within-a-pipe” lining process that uses existing access points and doesn’t require tearing out walls or landscaping. 

    Our expert pipe lining installation teams have rehabilitated more than 2 million linear feet of pipe!